An overview of the works I developed a new type of coalescence separator (QFL-J-10), a blend of advanced phase separation technique, using polymers as a filter, a targeted selection of water affinity characteristics, so that the separator can not only replace conventional gas / liquid separation apparatus, and the gas can be removed in the removal of small solid particles and tiny droplets which ,, it is also effective to coalesce into larger droplets, Excellent removal. Aqueous gas via line to the coalescer, from the entrance into the tank, from the inside out through the filter, through the coalescence filter in the gas entrained moisture separator down, clean gas flows out from the outlet, the water separated by gravity down remitted along the outer wall of the lower part of the role of the filter tank, tank bottom has a solenoid valve, the water can be timed automatic discharge points. Filter has a pressure gauge needle, can be read directly import and export filter differential pressure. Filter mounting a level gauge can clearly show the water level inside the tank. 2, the design parameters ⑴ flow: 1500m3 / h ⑵ Media: Gas ⑶ Working temperature: -30 ~ 80 ℃ ⑷ Design pressure: ⑸ filtering accuracy: 10μm ⑹ allowable pressure drop: 3000Pa ⑺ Protection class: IP54 ⑻ Material: Housing material: Carbon filter material: coalescing filter (US H & V Company) ⑼ anticorrosion coating: Outer: polyurea resin coating lining: 1mm thick epoxy anti-corrosion coating ⑽ Flange: DN80 RF HG20615-97 (raw materials into exports,) DN25 RF HG20615-97 (outfall)